Atas Eco-Seam Bedienungsanleitung PDF herunterladen

Eco-Seam is a one-piece, positive locking standing seam panel that can be fastened directly to

purlins as well as to solid underlayment. Eco-Seam panels are roll-formed from .032 aluminum and

24 gauge Metallic Coated steel. 16 oz copper is available subject to minimum quantities and lead

times. Eco-Seam panels are available in 12” and 16” widths. Panel lengths are cut to customer

specifications, with a minimum of 2’-0” and a maximum to transportation limitations. Specify with or

without stiffening ribs. Texture may be smooth or stucco embossed. Kynar 500

or Hylar 5000

based finish is available in 30 colors. An anodized finish is available in clear or bronze.

12”

16”

1/2”

1-1/4”

EECCOO

SSEEAAMM

PPaanneell

Installation Guide

Review and understand complete

guide before beginning installation.

This guide has been prepared as

suggested details to particular design

conditions. Each condition has certain

limitations to performance, aethetics or

economics. Professionals qualified to

assess this information for a specific project,

should determine that the selection and installation

are made to their requirements. ATAS cannot assume

any responsibility for the actual selection and/or

installation of materials. The panels, flashings and

trim shown in this guide are installed over solid and

plumb substrate. It is assumed that the structure has

been designed and prepared in accordance with local

building codes.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Installation Guide

Eco-Seam is a one-piece, positive locking standing seam panel that can be fastened directly topurlins as well as to solid underlayment. Eco-Seam panel

Seite 2 - Valley Detail

Eave DetailGable DetailValley Detail1. In re-roofing applications: cut back and remove existing shingles and drip edge to be flush with the eave and g

Seite 3 - Shed Ridge Detail

Hip & Ridge DetailHeadwall DetailShed Ridge DetailHip and ridge applications are handled in the samemanner.1. Install ATA Guard underlayment over

Seite 4 - Sidewall Detail

Pipe DetailStep 1Cut on the proper pipe diametermarked on the flashing. Step 2Position over pipe andslide down the pipe.Step 3Apply polyurethane seala