Atas InSpire SOLAR COLLECTOR BWS390, BWS392 Bedienungsanleitung PDF herunterladen (Seite 2)

Pencil Hardness: ASTM D 3363

T-Bend Flexibility: ASTM D 4145

Mandrel Bend Flexibility: ASTM D 522

Impact Resistance: ASTM D 2794

Adhesion: ASTM D 3359

Water Immersion Resistance:

ASTM D870

Abrasion Resistance: ASTM D 968

Acid Resistance: ASTM D 1308

Acid Rain Resistance (Kesternich):

ASTM G 87 or DIN 50018

Salt Spray: ASTM B 117

Cyclic Salt Spray: ASTM D 5894 and

ASTM D 5487

Humidity Resistance: ASTM D 2247

Accelerated Weathering: ASTM D 822

and ASTM G 23, ASTM G 151 or

ASTM G 153

Color Retention, Florida Exposure:

ASTM D 2244

Chalking Resistance: ASTM D 4214

Cleveland Condensing Cabinet:

ASTM D 4585

Cure test, MEK resistance: ASTMD 5402

Alkali resistance, sodium hydroxide:

ASTM D 1308 Procedure 7.2

Flame Spread Rating: ASTM E 84

Organic coatings meet requirements of

AAMA 2605 when applied to aluminum

Panel testing/ratings:

Aluminum: ASTM B 209

Zinc: EN988

Coil Coating: ASTM A 755

Field Tested and Approved

Load Tables available upon request.

Environmental Considerations

The InSpire solar collector is a renewable

energy system that benets the environment

by:

- Supplying 1 to 2 therms of energy per square

foot of collector per year

- Collecting solar energy at a typical eciency

of over 60%

- Reducing annual CO

production by

40 to 60 pounds per square foot of collector

- Utilizing metal components that contain

recycled material and are recyclable at the end

of their life cycle.

Projects with InSpire technology may qualify

for LEED

credits in renewable energy,

optimizing energy performance and other

areas.

5. Installation

InSpire cladding is generally installed 4

to 8 inches from the main wall and can

be installed over or around existing wall

openings. Installation manuals and project

specic installation drawings are available.

Contact ATAS technical service advisors for

more information. If required, additional air

distribution equipment is installed using

standard practices.

6. Availability & Cost

Availability:

The InSpire system is available through

product distributors. A complete line of

related components and trim accessories

is available to complete the wall system. In

addition, a complete line of rainware and

perimeter roof edge trims can be supplied

by ATAS to complement the wall system. Flat

sheet and/or coil stock is available in matching

color for fabrication of related components by

the installing contractor.

Cost:

Cladding cost is comparable to a brick wall.

Contact product distributors for current

pricing on system components. Many state

and federal incentives are available. The typical

payback is 3 to 8 years, sometimes 1 year or

less.

7. Warranty

Products coated with a uoropolymer, KYNAR

500® PVDF or HYLAR® 5000 PVDF nish carry a

limited warranty against chalking and fading.

8. Maintenance

InSpire collector panels are virtually

maintenance free. Surface residue may

be easily removed by conventional

cleaning methods. For painted products,

minor scratches should be touched up

with a matching paint, available from

the manufacturer. The balance of system

components contain no liquids or moving

parts, except for intake fans and dampers,

which require normal maintenance.

9. Technical Services

Complete technical information and literature

are available from ATAS International. System

design specications depend on individual

project requirements, such as the amount of

ventilation air required and the available wall

area. The ATAS technical sta may assist by

performing feasibility studies to determine

potential energy savings and dene air

collection and distribution requirements for

specic projects. ATAS will assist with design

ideas and shop drawings.

10. Filing Systems

- www.atas.com/inspire

- Additional product information is available

from the manufacturer upon request.

InSpire

is a trademark of ATAS International, Inc.

KYNAR 500

is a registered trademark of Arkema.

HYLAR 5000

is a registered trademark of Solvay Solexis, Inc.

7 ⁄”

39 ⁄” Coverage

41¼” Overall

1¼”

7 ⁄”

39 ⁄” Coverage

41¼” Overall

1¼”

BWS390

BWS392

Exposed Side

1 2

ATAS INTERNATIONAL, INC 1

Kommentare zu diesen Handbüchern

Keine Kommentare

Atas InSpire SOLAR COLLECTOR BWS390, BWS392 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für Zuhause Atas InSpire SOLAR COLLECTOR BWS390, BWS392